Searching For Inspiration? Try Looking Up Replacement Window Handle

Choosing uPVC Replacement Window Handles

Many customers agree that replacement double glazing windows handles made of upvc are easy to install and feel comfortable. However, it's important to know that the type of handle you pick must be right for your window.

The key factor is the step height, which refers to the gap beneath the nose of the handle to the frame or base. Other factors to consider are lockable mechanisms and designs.

Replacement parts

There are a wide range of replacement window handles made of upvc available to buy. There are numerous styles and colors to choose from, and you're certain to find something that matches the windows you have. It's easy for you to make an impulse purchase especially when the handle is damaged. So it's best to look over a few aspects before purchasing a replacement. The first thing to think about is the kind of upvc handle do you currently have and what the difference between types is. The table below lists the most common handles so that you can find the right one to suit your window made of upvc.

The majority of double-glazed windows have epag handles. They are typically attached to the frame with two screws which screw into the frame from both sides.

The spindle bar at the back may be of different in size, and will determine whether they are left-handed or upvc Replacement Window Handles right-handed. This is why it's important to take a measurement of the handle you have in order to make sure you're getting the right replacement.

The arm is attached to the frame with two bolts, just like the Espag handle. However, the arm has a lower projection, so that it doesn't damage your blinds. This is a good option for blinds on your upvc windows and want to ensure that the handle will blend in with them.

Cockspur handles are similar to Espag handles, but they have a nose which closes over a wedge that rests on the window frame. This type of handle is available on older wooden and upvc windows.

Tilt and turn handles are often found on casement windows. They can be operated either by turning the handle or pushing at the top of the window. This opens the window from the inside and lets you to clean from outside without needing to step out on a ladder or climb over the garden fence. They also make a great option for those with limited mobility. They can be a great way to improve security and accessibility at home.

Hints and tips

Many people will have to replace their uPVC window handles at some time. It is essential to know some tips and tricks that will make the job easier.

Examine the type of handle that is in your home. Depending on the type of handle and locking mechanism, it could be necessary for you to replace the handle and lock. For instance, if shoot bolts (espag) and roller cams are seizing or jammed the handle, you'll need to change them as well as the handle itself.

Thankfully, the majority uPVC handles adhere to industry standards and are similar. This makes replacing them a relatively simple process. The first step is to remove the screws from the handles. These are usually the pozi-drive screws. Once the screws are removed, you will be able to dismantle the handle.

When you have the handle split from the handle, it's a good idea to make note of how much of the spindle protrudes from the base of the handle. This will allow you to determine the length of the spindle for an alternative handle. Simply measure the length the square peg extends from the bottom of the handle.

This is particularly important for inline uPVC windows handles, as they are always straight and only open to the left or right. They won't work in the middle. It's a good idea in the event that you're not certain of the kind of handle you have at your home, to borrow a handle and check out how it functions.

You can also determine the hands of a uPVC window by watching how the handle rotates when it is in use. Handed handles can be rotated clockwise or counter-clockwise. If you are unsure then ask someone to open the window with the handle to see how it functions.

Take a measurement of the spindle

The selection of the right replacement handle for your windows can be difficult as not all handles are the same size. It is crucial to measure the spindle accurately when fitting a new handle. This will ensure that the handle fits. There are many different kinds of uPVC window handles and they operate in different ways, so it is essential to know the type of handle you are using and the type of locking system.

Espag handles have a spindle that extends from the rear of the handle and goes into the lock gearbox within the window frame. When you turn the handle, this is then a way to turn the lock in the gearbox, allowing you to open the window. They are typically used on uPVC casement windows and they can be locked with keys to provide extra security.

Cockspur handles have a "nose" that is closed over a wedge-shaped striker block on the frame. They are commonly found on older double glazing window replacement-glazed uPVC windows. They are also fairly simple and they can be locked using keys. It can be more difficult to replace these handles as they are not as popular as the handles with espagnolette.

If you have an open tilt and turn uPVC window then you will require a specific type of uPVC replacement glass for windows handle that comes with an entirely different locking mechanism. The handle will tilt the window and also allow it to rotate back and forth in order to fully open it. You must make sure that the handle you pick has a length of at least 55mm or it will not be able to get into the window frame.

The same procedure can be used to remove and replace the uPVC handle. But, you'll need to take care when you remove it. It is possible to open the window more than normal to reach both screws that attach it to the frame. Once you have put in your new uPVC handle and checked that it is in the proper position, then you can tighten the screws, and test the lock to confirm that it functions correctly.

Replace the handle with the new one.

Once you have the right handle replacement, it's going to be easy to screw it into the appropriate position. It will require a screwdriver and an electric one could be more convenient. When screwing in place it is crucial not to over tighten the screws as this could cause the handle to crack or warp.

Inserting the spindle is the second crucial step to install the new handle. This is the component that is inserted into the handle and is responsible for operating the locking mechanism inside the window. It is vital that it fits correctly as this will ensure that the window is able to be closed and opened with confidence.

There are many different kinds of uPVC window handles. There are various kinds of window handles made of uPVC.

Espagnolette Handles - These are handles that are inline and can be used on tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that can be useful for windows that are difficult to reach.

Tilt and Turn Handles - They are used on tilt and turn windows to operate the closing and opening mechanisms.

The majority of uPVC window frames are fitted with these. In the UK they are often known as "Bay Windows".

If your uPVC window handle is broken, it can be very frustrating. There isn't any need to replace the entire uPVC window because of a broken handle. There are a few simple steps you can take to repair or replace a broken uPVC handle.

You can fix your broken window sash replacement handle swiftly by identifying the type and determining the spindle. It is crucial to be patient and prioritize safety when working with windows and tools, however, this is a easy task. It can mean the difference between having a secure and secure home, or a window that can be easily opened. Bridgewater Glass is the place to go if you have questions or would like to speak to an expert about replacing your window handle. We have a team that is knowledgeable and experienced to assist you with any issue.