5 Common Phrases About Repairs To Upvc Windows You Should Stay Clear O…

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double glazing repair panes are joined by internal beading, it is difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any shards fall on the fabric instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap between the door and the window is significant, you may need to consider a security screen that also includes a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from worsening.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the size of the window, tighten the screws to hold them in the right position.

If you are unable to move the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loose their elasticity. It is important to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. Most often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. The first step is to close the window and perform an initial test to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on how severe the problem is, the old caulking may need to be removed. When it is time to uPVC repair, you should avoid 'over-caulking'. This can make your window more difficult to clean and decrease its energy efficiency.

Verify that the drainage holes are free of debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens in the breeze. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is an easy process but it can be simpler if you have someone to help hold the frame up.

Make sure that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrows on each hinge, this shows which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to offer advice.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more smoothly. It can also reduce the possibility of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different things. Firstly the hinges, again because of wear and tear, could become misaligned. This causes an opening to appear where the sash joins the frame. If they are damaged beyond repair, it could be required to realign them. Second, the interlock can be disaligned. This is located on the hinge's side and might require to be cleaned. In some cases, it may be necessary to replace the hinges.

The seals may wear out or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to replace them instead of fixing them. If you encounter any issues with your upvc window it is recommended to speak with an expert as soon as possible.