7 Small Changes That Will Make A Big Difference With Your Upvc Window …

UPVC Window Handle Replacement

Replacing a broken window handle is a relatively simple process and with the right tools it can be done quite quickly. It is essential to know the type of handle you have and the spindle's size before you purchase the replacement double glazed windows.

Older uPVC window handles have a spur that protrudes and locks over a wedge striker. They can be right or left-handed and have to be replaced with the same handle.

What kind of lock and handle do I have?

There are many kinds of window handles made from upvc and locks, each with their distinct advantages and functions. The type of handle you are using will determine how easy it is to open your windows and whether or not the locking mechanism functions in the way you want it to. Over time, and with regular use, the upvc handles on your windows could get worn out and damaged. This makes them less secure and effective. In some instances they could even fall off completely. If you notice that your upvc window handles have fallen off, it is important to fix them as soon as possible. This will help prevent burglaries, and keep your house safe.

It's an easy task that anyone can complete. With just a few tools and the right knowledge, this is a simple procedure that shouldn't take more than a couple minutes. You will need to be aware of the type of lock or handle you have on your window. This will help you select the right replacement.

Inline Espagnolette Handles

They are typically found on the outside of the window. They are flat in design and have a latch that connects to the locking mechanism on the window frame when it is turned. Inline upvc handles also have a spindle that runs through the center of the handle and into the frame of the window to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles have a single screw that holds the handle to the frame of the window and are not as secure as other types of window handles.

Handles that tilt and turn

Unlike the other handles made of upvc that are tilt and turn, these handles can be rotated to open the window and turned inwards to allow to let air flow in. They feature a 7mm spindle in the back and are available both in right-hand and left-hand versions.

When you are purchasing replacement handles for upvc it is essential to measure the spindle's length as not all are the same size. Drop something in the middle of the hole to measure the length. This is the maximum spindle size that will fit into your windows.

What is the spindle?

uPVC window handles work in a similar way to doors. By turning the handle, you can activate a latch inside the frame. This opens the window so that it can be shut and Window Handle Replacement opened. The handles could be damaged, especially if they're often used or are subjected to harsh conditions. This can lead to the need to replace your uPVC windows handles as they might not operate the window pane replacement in a proper manner for a long time.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. These handles are designed to fit into the uPVC frames in different ways and each handle type has a particular spindle that is used to secure the mechanism into the window. It is important to identify the type of handle you have installed on your uPVC windows to ensure that you replace it with a suitable one.

The base section of the handle will tell you what kind of uPVC it is. There should be a "snap in' cover over one screw which holds the handle base in place. When you remove this cover you will be able to see the second screw that holds the handle base in place. Once both screws have been removed then you should be able to remove the handle from the uPVC.

Once you have removed your uPVC window handle you need to carefully remove the old spindle from the locking mechanism. Take note of the length of the spindle. You'll need buy a replacement of the same length as the handle that was originally used and the locking device.

The spindle wears out and is unable to operate the locking mechanism. This could be due to corrosion, damage due to constant use or a loosening locking mechanism. When this happens it is required to replace the window handle and the locking mechanism to restore complete functionality to your uPVC windows.

How do I remove my old handle?

Through time and regular use, window handles can become damaged or broken and if this happens it is important to repair them as soon as possible to ensure the security of your home. It is simple to replace a damaged or worn handle. The task can be completed in under one minute without the need of special tools.

To take off the handle, first remove the screw located at the base of the handle. Once the screw has been removed, the handle can be removed. Another screw will be situated at the base of the handle. This too can be removed. Once the two screws are removed, the handle can be detached from the window's base.

After the handle has been removed, grab the new handle and line up the fixing holes with the holes present in the window frame. If there is a cap or sticker on the new handle, take it off it if necessary and then screw the handle into the appropriate position. It is essential to ensure that the handle works once it is installed. Turn the handle around and make sure that the lock mechanism is working.

Espag handles come with an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism inside the frame of the window. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that hooks over either the frame's outer or transom bar cross-member inside the window.

Once you have the new handle in place, slide the spindle inside the lock in the window and then tighten it down. When the handle is fixated and secured, replace the snap-in cover and the screw cap (if necessary). The handle is now ready to use by opening and closing the window a few times to check that it is working well and securely.

How do I fit the new handle?

It's not difficult to change the handle on your uPVC windows. The procedure is easy. You only need a screwdriver, and a bit of patience. The first step is ensure that the handle you have previously used is locked and then take out any screws that are visible. you can also replace these with screw caps if required. Once the handle is removed and you are ready to take a note of the length of the spindle which protrudes from the back of the handle. This is important as it will determine the type of handle you'll require to purchase.

Espagnolette handles are the most common type of handle for uPVC windows. The spindle passes through the handle to control the locking mechanism in the window frame. The handle opens the latch and allows the window to open. With time and regular use, espagnolette handles may be damaged or damaged, making it necessary to locate a replacement.

Cadenza handles are a different kind of uPVC window handle commonly used on tilt and turn windows. They have a protruding blade that operates an interlocking mechanism that is multipoint within the window. They are usually more secure than espagnolette handles as they are only accessible from the inside. They can be replaced using the same method as espagnolette handles but you will need to ensure that the new handle has a curved blade as opposed to one that is flat.

Once you have selected the correct handle, you can align the new handle with the existing screw holes before screwing it in place. Then, put the screw covers on and test the new handle. This is done by moving the handle from locked position to the unlocked and the reverse direction a few times. If you experience any issues, it might be worthwhile contacting a professional to see if they can assist in resolving the issue. They can often advise you on the best approach to resolve the issue in a quick and efficient manner.