5 Cliches About Repairs To Upvc Windows You Should Avoid

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is important to make sure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the old panes. In this case you'll need find some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the fabric instead of onto the floor, where they could be trampled on and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the distance between the door and the window is significant, you may want to use a security screen that also has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they can suffer from a variety of problems including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It's important to take action when you realize that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll need to open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit of your window, tighten the screws to hold them in the right position.

If you can't reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. The majority of the time this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. You'll first need to close the window and then perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be done by any DIY expert. Depending on the severity of the problem is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window Doctor repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze It could be hinges at the fault. They can be repaired by any DIYer who is skilled and can usually be done within a few minutes.

Almost every household in the UK will have top-hung or side hung upvc repairs windows that are hinged and like any mechanical part they can wear down over time. It is essentially a very simple process but it can be easier when you have a person to assist in holding the frame in place.

Verify that the uPVC hinges open and close in the proper direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular way or by inadequate installation at the factory. Sending us a picture via our website will often resolve the problem. We are happy to provide assistance.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear could become misaligned. This causes gaps to develop where the sash joins the frame. They can be repaired by giving them thorough clean, however when they're beyond repair, it might be necessary to get them aligned or replaced. In addition, the interlock could also become misaligned. It is located on the hinge's side and may need to be cleaned. In certain instances it is possible to replace these.

The seals may wear out or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your upvc window replacement near me you should consult an expert immediately.