15 Reasons To Not Ignore Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism deteriorated? Perhaps the window or door handles don't meet up properly or are hard to use.

You'll be wasting energy if your double-glazed doors don't work properly. This increases the chance of burglary. Owen the Locksmith can fix your door lock at a reasonable price.

Snapped Key

It can be a hassle when a key gets stuck inside the lock. It's also potentially an issue for security, since the door may not lock and leave you vulnerable to burglars. There are a couple of quick fixes you can make to repair the issue and get your door working again.

First, remember to stay calm. If you panic and begin poking around wildly you may end up pushing the broken piece of the key even further into the lock, thereby making the situation even more difficult.

Spray WD-40 or another penetrating lubricant, into the lock. This will assist the broken piece to come out more easily. You can also employ a screwdriver in order to break up any stuck pieces that could be hindering the flow. If you happen to have a little bit of the key sticking out it, you can use a paperclip or some other thin metal object to grab it and pull it out. Both methods are effective, but you need to be careful not to push the broken key piece further into the keyway.

Some paperclips have grooved edges, which can serve as hook extractors, and some Jigsaw blades can also be used for this use. If you do not have any of these handy, you can make use of needle-nose pliers to bend and create hooks. Finally, a pair of tweezers can be used to grip and pull out the last part of the broken key.

If you are unable to remove the broken key piece, use a lock deicer. It's available at most hardware stores and works by freezing any moisture that may be present in the lock.

If none of these strategies seem to be helping, it might be time to call a locksmith. Fitlocks experts can fix issues such as broken handles or snapped keys with uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to make them more user-friendly. You can book repairs to your double-glazing online or contact us to discuss your requirements.

Broken Cylinder

A broken cylinder can pose an extremely risky security issue. Luckily, it's an easy repair for a professional locksmith to complete. To repair the cylinder, locksmiths will need to tap it. This can be done with a hammer, or any other tool. However, the most effective method is to employ a wire or long match. Then, put the end of the match or wire in the keyway. The locksmith can strike the lock and break it open. This is better than using the hammer, which could damage the lock.

Overheating is the main reason behind cylinder heads cracking. This can occur when the cylinder block and head are made of various metals, including cast iron and aluminium. When the different metals are heated and cool at different rates, it can create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Another reason that could cause cracks in cylinders is corrosion. If the head and block of a cylinder are not maintained in a timely manner they could corrosion or rust, which can cause them to expand faster than expected. This can lead to cracks as time passes.

If your upvc repairs, Read the Full Write-up, window or door lock is brittle or requires a lot of pressure to turn, it can be caused by several things. A malfunctioning locking mechanism, misalignment or a worn handle are common causes of this issue.

This is a straightforward and affordable fix that the majority of double glazing owners can do. A professional locksmith can usually solve the issue within one hour of arriving at the home. They can repair the locking mechanisms, or change the window handles and change the gearboxes, based on your specific needs. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective option for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders, which offer an additional security layer from burglars. It's a small price to pay for the peace-of-mind that comes from knowing your uPVC door is secured.

Broken Handle

It's not a surprise that window doctor near me handle locks could break. They have intricate mechanisms that wear out over time. It can be difficult to determine the cause of the broken window handle lock and repair it correctly.

Fixing the broken handle, regardless of whether it's the internal latch or the locking mechanism can increase the security of your uPVC door and reduce the risk of draughts. It is costly to repair or replace the handle in a way that isn't done correctly. It can also damage the frame and lock of your door.

With the window open, loosen the screw that holds the handle using the screwdriver. The screw should be on the inside of the backplate, usually concealed by the cap of the screw for aesthetic reasons. You should not be able to replace any internal parts of the handle like the levers and plates on either side. It is best to keep them in the same place so you can replace them again in the event of a need.

Then, rotate the handle so it's at 90 degrees to the window frame and loosen the screw at the back of the handle which holds it to the internal spindle by using a second screwdriver. Once the screw is loose, you can pull the handle out and take the broken spindle out. Replace it with a new spindle, making sure it's the same length (you can find them online or in hardware stores). Screw it in the frame. Don't over tighten the screw because this could cause damage to the handle and window frame.

Ensure the new handle is fitted after which you can close and test the handle. It should function smoothly, and you will be able to open your windows once again.

While you're working on the handle, don't forget to ensure that your uPVC windows are shut correctly. If they aren't closing properly, you may experience damp or draughts in your home. You could also compromise the energy efficiency of your home. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they are able to shut properly.

Broken Spindle

It is usually the case that the spindle in a handle breaks rather than the handle itself. This is most typical in uPVC tilt and turn windows. These kinds of windows require a handle that acts as a locking mechanism within the window frame. The handle is attached a central rod which activates locks that are shaped like mushrooms and secure the window frame keep. If the dead latch mechanism does not open when the handle is turned it is possible that the spindle has been damaged and this could be a very frustrating issue.

Fortunately there are options to remedy this situation. A skilled locksmith can quickly and efficiently fix this problem. They will be able to take apart the window handle using a tool to remove the wheel part of the mechanism, where the spindle goes. This can be done with no damage to the handle or the window frame.

Once the wheel has been removed, the technician can inspect the spindle to determine what has caused it to break. This involves breaking the spindle into its individual parts and meticulously noting their general condition, as in addition to any specific areas of wear or damage. The process is done in a clean room by highly skilled technicians.

The next step is to clean the damaged spindle. This will help remove any debris or dirt that might be preventing it from working normally. After this, the spindle could be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is comparable in size to the original. Then, he will make holes in the same way into both pieces. This will ensure that the spindle is perfectly matched with the handle.

If the damaged spindle can't be repaired, it could require replacement completely. Home centres sell generic substitutes, but if your window style is rare you'll need to contact an expert in woodworking or cabinet making who can make the exact part. After the spindle is installed, it can be connected to the handle. Place the screw holes on the handle with the existing screws in the frame. Once the new handle is seated you will be ready to operate your uPVC window.