10 Misconceptions Your Boss Shares Regarding Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards will fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is large, you may be interested in a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sagging. A sagging upvc window repair window can cause problems with light, draughts, and even security. It's crucial to act when you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows to reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close the window and verify the an appropriate fit. If you are happy with the size of the window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Most often, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the window and perform an experiment fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. Windows that leak water do are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on how serious the issue is, old caulking may need to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This will make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or uPVC window repair slack and open with ease it could be hinges at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component hinges will wear out over time. It is essentially a very simple procedure, but it is simpler with someone else to help hold the frame up.

Make sure that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be pleased to offer you advice.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also become disaligned as a result of wear, creating an opening where the sash and frame meet. This can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. In addition, the interlock could be misaligned. This happens on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace the hinges.

The next most common cause of draughts is the window seals. They can become worn down or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is crucial to realize that windows last for a certain period of time and there may come the point when it's more efficient to replace them than repair them. If you have any problems with your upvc window repair window you should consult a professional as soon as possible.