What's The Reason You're Failing At Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that will assist the new pane to fit perfectly into the window frame.

If you plan attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not on the floor and could be trampled under.

After the glass window repair has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you may want to consider using the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a number of problems that include sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's crucial to act immediately if you realize that your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows so you can get at the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fitting. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it can be due to the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close the window and perform an experiment fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any competent DIYer. Based on the severity of the issue the old caulking may need to be removed before a new layer is applied. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, UPVC window repairs it is more likely the problem is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass window repair seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open in a breeze it could be the hinges that are at fault. They can be replaced by any competent DIYer and are usually completed in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It is very easy to change the hinges on a window however it is easier if someone helps hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window incorrectly or a faulty installation at the factory. Sending us a picture through our website can often solve the issue. We are more than happy to give suggestions.

It is also essential to grease the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become unbalanced due to wear, which can cause a gap between the frame and sash. If they are beyond repair, it may be necessary to get them re-aligned. The interlock may be disaligned. It is located on the hinge's side, and may need to be cleaned. In some cases it is possible to replace these.

The next common cause of draughts is the window seals, these can become worn down or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are typically made of fabric which are filled with a sort of filler and can be positioned on top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. However, it is important to realize that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.