The Hidden Secrets Of Replacement Window Handle

Choosing uPVC Replacement Window Handles

Many customers agree that replacement handles made of upvc are easy to install and feel good. However, it's important to know that the kind of handle you pick must be right for your window.

The height of the step is the most crucial factor. It is the distance between the handle and the frame or base. Other factors to consider are lockable mechanisms and styles.

Replacement parts

You can buy a variety of replacement handles made of upvc. There are many styles and colours to choose from, so you're bound to find something that is compatible with the windows you have. It's easy to purchase a product on impulse especially when the handle is damaged. Therefore, it is best to check a few things before buying an alternative. First, you must know what type of handles made from upvc you have and what the differences are between them. The table below lists the most commonly used handles to help you identify the one that is suitable for your upvc windows.

The majority of double-glazed windows today come with handles that are epag. They are usually fitted to the frame with two screws that screw in from both sides.

They have a spindle bar on the back which can be a variety of sizes and this will determine how they operate (either left or right handed). This is why it's essential to measure the current handle in order to make sure that you're ordering the correct replacement.

The arm is fixed to the frame by two bolts, similar to the Espag handle. However, the arm has a low projection to ensure that it doesn't scratch your blinds. This is a great choice when you want the handle to blend with your blinds, and you have upvc windows.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that sits on the frame of the window. This type of handle is often found on older upvc windows as well as on some wooden windows.

On casement windows, tilt and turn handles can be operated by turning the handle or pressing on the top of the window. The window is opened from the inside and allows you to clean outside without having to climb out onto a ladder or walk over the garden fence. They're also an excellent option for those with limited mobility and increase security and accessibility in the home.

Tips and tricks

There are many different types of uPVC window handles, and many people will find themselves replacing them at some moment. It is important to know a few tips and tricks that will aid in the process.

Find out what kind of handle is in your home. Based on the type of handle and the locking mechanism, it may be necessary for you to replace the lock and handle. For instance, if shoot bolts (espag) and roller cams are jammed or seizing, you will need to change them, as well as the handle itself.

Thankfully, most uPVC handles are similar and follow industry standard size, which makes replacing them a fairly easy process. First, remove the screws on the handles. These are usually pozidrive screws. Once the screw covers are removed, you will be able to dismantle the handle.

When you have the handle broken, it's an ideal idea to take note of how much of the spindle protrudes from the base of the handle. This will help you determine the length of the spindle for the replacement windows prices handle. Simply measure the amount that the peg is sticking out of the bottom of handle.

This is particularly important for inline uPVC handles for windows, since they are always straight and will only open to the left or right. They won't work in the middle. If you're not sure of the kind of handle you have at home, it could be beneficial to get an existing handle from your neighbour's house and see the way it works to get an idea.

Another excellent way to figure out what the hand of the uPVC window handle is to look at the way the handle rotates when operating. Handles can be rotated clockwise or counter-clockwise. If you are unsure you are, ask someone else to open the window with the handle to see what happens.

Find the spindle's measurement.

The selection of the right replacement handle for your windows can be a challenge as different handles are not identical in size. It is important to accurately measure the spindle when installing a new handle. This will ensure that the handle fits. There are several different types of uPVC window handles and they operate in different ways, so it is vital that you know which kind of handle you have as well as the type of locking system that you are using.

Espag handles come with a spindle that extends from the rear of the handle and goes into the lock gearbox within the window frame. When you turn the handle, this turns the lock within the gearbox, and opens the window. They are installed on uPVC windows with casement. They can be locked using keys for extra security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They are characterized by an "nose", which closes over a wedge shaped striker block. They are also quite easy to install and can be locked with keys. It can be more difficult to replace these handles since they are less common than the handles with espagnolette.

If you have a tilt and turn uPVC then you'll require a replacement handle with a different locking system. This will be able to open the window, but also turn it around to open it fully. It is essential to make sure that the handle you pick has a spindle size at least 55mm, or it won't be able to get into the window frame.

You can follow the same procedure to remove and replace this kind of uPVC handle, however you'll need to be cautious when removing the old one. It is possible to open the window wider than normal to reach both screws that attach it to the frame. After you have installed your new uPVC handles and checked that they are in the correct position, you can tighten up the screws and then check to make sure the lock works properly.

Fit the new handle

Once you have the right handle replacement, it's going to simply be screwed into the appropriate position. It will require a screwdriver, and an electric one could be more convenient. It is crucial not to overtighten the screws when screwing them into. This could cause the knob or handle to become warped.

The second step in installing the handle is to install the spindle. The spindle is a part that is inserted into the handle to control the locking mechanism of the window. It is essential that the component is properly fitted, as this will permit the window to open and closed securely.

There are a variety of types of uPVC handles. These include:

Espagnolette Handles are handles inline that can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle however they have a curved design that is useful for windows in difficult-to-access locations.

Tilt and replacement window glass near Me Turn Handles These are used on tilt and upvc replacement window handles turn windows to control the closing and opening mechanisms.

The majority of uPVC window frames are fitted with these. They are often referred to as 'Bay Windows' in the UK.

If your uPVC window handle is broken it can be extremely frustrating. However, there is no need to replace the entire uPVC window because of a damaged handle. There are several simple steps that can be taken to repair or replace a broken uPVC window handle.

You can fix your broken window handle fast by identifying the type and determining the spindle. It is essential to take your time and prioritise safety when working with windows and tools but this is a straightforward task. It can be the difference between having a safe and secure home, or a vulnerable, easily opened window! If you have any concerns or want to talk to a specialist about replacing the handle on your window, uPVC Replacement Window Handles call Bridgewater Glass. We have a team of highly experienced and knowledgeable experts who can assist you with any problems you might be having.