14 Common Misconceptions Concerning Double Glazed Window Repair

Double Glazed Window Repair

Double glazing is a great investment in energy efficiency. It helps prevent loss of heat during winter months and helps keep your home cool during summer. Double glazing windows repaired when needed is a great method to ensure they are operating effectively.

Over time, your double-glazed windows may suffer from issues such as condensation and misting. This can cause your double glazed windows to be difficult to open or close.

Broken Panes

A stray ball or a flying pebble from your lawnmower, or even a heavy storm can shatter the double panes of your windows, leaving your home exposed to the elements. While a damaged window may be difficult to repair but you don't need to replace it completely. In fact the insulated glass between the two panes is in good shape, and you can fix your double-pane windows with a bit of DIY effort.

To begin, you'll need remove the broken glass from the frame. This is a messy job, and you'll want to be careful to stop any glass shards from falling on the floor or slipping out of the frame. Wear gloves for glaze you hands, and a rag around the broken glass area to prevent further damage or cuts. After removing the broken glass, clean the frame of the window thoroughly to remove any sealant or debris. It is essential to smooth rough areas of the frame to ensure a smooth surface for the new glazing.

After the frame has been cleaned then you can apply a fresh layer of glazing to the area where the broken pane was removed. This is the best way to seal and protect your window. It can also reduce your energy bills by preventing drafts and water from entering your home. Next, you will need to choose your glazing material. There are several options, including clear tape that is more durable than regular tape and helps prevent further cracking of your window or glazing film, which is similar to clear plastic wrapping. This option has the advantage that it can be painted to match your frame, and will also block out rain and ice.

No matter what material you use, it's important to press the glaziers points into the place where the putty joins your frame. They will help hold the new glass in place and aid it stick to the frame. The glazier's point can be found in hardware stores, and they come in pre-made ropes that you roll onto the frame rabbets.

Condensation

If you have a problem with condensation, glaze it is best to contact your window manufacturer. Many companies offer warranties and guarantees that will cover the issues. Condensation and fogging between panes of glass is an obvious indication that the seals between your windows have been damaged and can only be fixed by an expert who will fix both panes.

It's a complicated procedure that requires special tools to remove and replace the window. A professional can do this task and provide the equipment. Using these tools can be dangerous, however it is recommended to leave this kind of work to professionals.

Wear safety glasses and gloves if you choose to do it yourself. You could be exposed to flying glass fragments. It is essential to remove all putty or metal glazing points from the grooves that will receive the new window. You should also brush the frame with wire, and then vacuum or wipe it with a damp cloth. Once the frame has dried it is time to order an additional piece of glass that's 1/8" shorter in both directions than the existing window. Make sure the glass fits into the grooves.

You will require a layer of silicone caulk in the grooves of your frames to ensure that the glass you are installing is secure in its installation. After the silicone caulk is dried, you can smooth it out and make any necessary adjustments. The wood molding can be put back in place.

Double-glazed windows may be difficult to open and close if the weather changes dramatically. Extreme temperatures can cause frames to expand or shrink and this can make them fall or stick. You can try wiping down the frames with water and lubricating them in the event that this happens however, it's better to seek advice from the company that installed your windows.

Misted

Misted Double Glazing is a window issue that is caused by moisture getting trapped between the glass panes of your double-glazed windows. Double glazing is made up of two panes which are separated by a gap filled with argon to improve thermal efficiency. This creates a airtight seal that keeps warm air inside and cold air outside.

This seal can fail over time, and moisture can build up between the glass panes and cause them to become to appear misty. This occurs because the sun heats the gap between the panes of windows, causing the water to evaporate.

This is a normal process but if it happens between the window panes it can be a problem since it will no longer be able to control the temperature in the room, and allows the outside temperature to affect the indoor temperature. Northfield Glass can help you in the event that your double-glazed windows begin to fog.

We can replace a single sealed unit, without having to replace the entire window. This is more streamlined than a total replacement. Our misty window repair involves taking off the glass unit, cleaning it, and then replacing it with a new one to make an airtight seal.

Some companies in the field claim that they can inject chemicals through holes drilled into windows with mist to remove the fog and condensation. We don't recommend using this method. This method is not just unsightly but could also damage your toughened glass and leave you with a window that doesn't function properly.

It is important to fix the issue as soon as you can, because if left untreated it can result in the growth of mould, which not only damages the window, but also poses health risks to your family. The condensation in the window could cause other issues with your property such as damp or rot. In some instances the window might need to be replaced completely.

Blown or Failed

Double-glazed windows are made up of two glass panes with an air or inert between them. This improves their thermal efficiency by keeping heat in and the cold out. Over time, the gas can become depressurised which can lead to a range of issues.

Condensation between panes is one of the most frequent. It's not a sign of a window failing, but it could be a sign that you should replace them. Condensation could also be an indication of a damaged double glazing that will require a re-installation.

It is also important to look for draughts coming from the double-glazed windows. This could be due to a failed seal, a broken handle, or a damaged lock. A draught is evident and can result in more expensive heating bills Therefore, it is essential to fix it sooner rather than later. You can test the seals by rubbing around the edges of your window frame to determine if you feel any cold air.

There will also be water beads on the interior of windows if your window seals are failing. This is a sign that you should replace the seals on your double-glazed windows.

Your window frames are made to move slightly, as they need to do to keep the glass sheets in their place. In time, this special packaging material could be compressed. This can result in the seal being broken. This allows air to flow between the panes, and decrease the efficiency of your window.

A seal that is blown is a clear indication that your double glazing has failed and needs to be fixed immediately. A damaged seal can stop your double glazing performing its primary purpose that is to keep the cold out and warm air in. A damaged seal could let moisture in your home, which can result in mold and other unpleasant conditions. Contact a double-glazing specialist when you notice a blowing window seal. They can fix the entire unit.