공지사항

HOME >참여마당 > 공지사항
공지사항

The Myths And Facts Behind Ghost 2 Immobiliser Reviews

페이지 정보

작성자 Teena Helton 작성일24-02-13 18:31 조회37회 댓글0건

본문

Ghost 2 Immobiliser

Ghost is an wireless security system that protects your car stolen with ghost immobiliser (http://littleyaksa.yodev.net) against key-cloning and hacking. It connects to the ECU unit via the CAN data network and is quiet and cannot be detected by thieves.

You can only disable it by entering an appropriate button sequence (like PIN code) you have programmed into your car with buttons on the steering wheel as well as the centre console.

Protects Your Car from Theft

Car theft is on the rise and cars are taken in a matter of seconds. It is important that car owners think about the additional security measures they can employ. Immobilisers are one of the most effective and established methods of keeping your vehicle secure. Ghost immobilisers are an excellent alternative because they are small, hidden within the wires of your vehicle, and do not emit any radio frequency signals. They are therefore not traceable and can be fitted without affecting the CAN bus system of your vehicle.

In contrast to other immobilisers that depend on keypad inputs, tags or a specific sequence of keys to disable them our ghost immobiliser near me can only be disabled by the pin code that was created by us at the time of installation. This unique disarm sequence uses the buttons already present in your vehicle such as the ones on the steering wheel, doors, or the centre console to stop anyone from starting their engine and driving your car away. This makes it impossible for thieves to copy your key or use jamming/spoofing equipment that can disable normal immobilisers.

Ghost immobilisers will not hinder your vehicle from being driven but also stops it from being smashed to be used for parts. This is a growing problem in the UK due to the increasing popularity of these kinds of cars. It can happen within a minute. TTW ghost immobilisers are easily programmed to protect vehicles from such attacks.

If you have our ghost 2 immobiliser installation 2 immobiliser in my area it will prevent your car being stolen from a service station or even when it is being driven by an employee whilst your car is on a lift at the garage. This is because the Ghost can be set to Service/Valet mode, and will only allow a unique sequence of buttons to be entered by you, our customers.

If you'd like to find out more about our ghost immobilisers, or would like to receive a no-cost quote, contact us now. We will be happy to assist you and give you peace of mind that your vehicle is secured throughout the day.

No Key Fobs or LED Indications to identify its location.

Protect your vehicle from the newest type of car theft with this non-detectable vehicle immobiliser that is incorporated into your car's CAN data network. Unlike other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators for its operation. Instead, it uses buttons in the standard factory controls already in your vehicle, such as those on the steering wheel, door panels, and centre console. This creates a code that has to be entered to begin the operation of your vehicle, which makes it impossible for thieves to locate.

The developers of the CAN-BUS device have also added additional security measures to guard against the device being hacked, or bypassed. It also has CAN-BUS blocking and a physical immobiliser cut, which means that even if your keys were stolen, the burglar will be unable to drive away with your pride and joy.

It's simple to have the CAN-BUS immobiliser installed in your vehicle and it only takes about 30 minutes. We will send a member of the team to your area so that they can arrange a time and place that suits you. Once your vehicle has been fitted and registered, you will receive an registration code as well as unique security codes to use on your phone and app. This makes it easier to use and will give you complete control over the security of your car.

The system is compatible with a wide range of modern vehicles, however If you own a classic or specialized vehicle we recommend you contact us to confirm compatibility. The supply and installation price of the Ghost Immobiliser 2 is APS449 and your car will be added to the International Security Register if fitted by one of our approved fitters. Don't be afraid to contact our helpful team with any queries. We're looking forward to hearing from you soon.

Easy to set up and program.

Modern cars are usually fitted with immobilisers to stop thieves from hot-wiring or taking your vehicle. Immobilisers are more effective than physical deterrents like locking your steering wheel and wheel clamps due to the fact that they are integrated into your vehicle.

The system connects directly to the CAN data network of your vehicle. It stops it from running until you enter the unique code. The unit is sealed and so small that it can be positioned practically anywhere in your car without the requirement for additional wiring. It doesn't emit radio frequency signals, so it can't be detected by scanners or code-grabbing equipment.

Ghost uses the buttons on your steering wheel, door panels, and the centre console of your vehicle to create a customisable (like a pin code) disarm sequence that must be entered in order to start your car. The pin code sequence is built around four to 21 button presses and is easily reprogrammable in the event of need. You can also put your vehicle in Service/Valet mode, so that it can be operated, but the vehicle cannot start or drive. This will keep your car safe when you take it in for servicing or valet parking, and make sure that the mechanic isn't able to access your pin code to deactivate your system.

If you will be away from your vehicle for a long time for example, on a vacation or business trip or on a business trip, you can use our app to obtain temporary pin. You can also enter your pin number manually when you want to drive the vehicle.

Our CAN bus immobiliser is also compatible with a remote keyfob or tracker. (Brand dependent) This gives priority to the ghost system. This is a great option for additional security in the case your vehicle is stolen or you lose your keys.

If you're seeking a way to safeguard your vehicle from key-cloning and hacking, contact us now to find out how we can help. We offer our services throughout the UK and also in our dedicated installation centre in Derby.

Service/Valet Mode

Modern cars have sophisticated eco systems that have stop/start that require the right inputs to function correctly. For instance the voltage of the battery and temperatures of the engine, as well as external temperatures and which electrical systems are active. Sometimes these can cause problems and can often be difficult to determine if it is bmw ghost immobiliser related or not. This is particularly true if the vehicle was recently serviced or valet parked. If this is a problem you can switch to the ghost mode which allows the vehicle to start and drive without the need for a pin code. This is helpful when your car is being maintained by an independent garage or valet-parked.

Press the button for service five times to enter service mode. The indicator light will flash twice when service mode is selected. You can exit this mode at any time using a PIN code. Once you have exited service mode the Ghost immobiliser will return to normal operation.

It is a discrete system that communicates with the vehicle ECU through the CAN data circuit. It is directly connected to the original buttons of the vehicle and does not employ radio frequency signals, like other immobilisers. This makes it virtually impossible for any other device or hacker to bypass the system. Even devices that spoof codes off an original key fob will not affect this.

It is an TASSA certified anti-theft system that is in compliance with the highest standards of security. It also has an exclusive vehicle marking system linking to the international security register that is a requirement of insurance companies.

The ghost immobiliser is a small unit that can be easily concealed in your vehicle's factory wiring. This makes it virtually impossible for thieves to steal. It is a sealed device that is so small, it can be installed in many different areas of the vehicle, such as under the dashboard or on the steering wheel.

The system utilizes the existing buttons within your vehicle (such as those on your steering wheel or door panels, or on your center console) to allow you to make an individual and programmable disarm sequence of up to 20 press long. It must be entered before your vehicle starts. It can be entered by anyone who has your pin code - it's secure and safe for you and your family, friends or work colleagues to use.cropped-KeyLab-1.png

댓글목록

등록된 댓글이 없습니다.


광주 광산구 상무대로 449 / TEL. 1688-9709 / FAX. 0502-310-7777 / k01082290800@nate.com
Copyright © gwangjuwaterski.org All rights reserved.