Repairs To Upvc Windows: What's The Only Thing Nobody Is Talking About

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you plan attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from getting into your home until a professional comes out to repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is large, you might think about the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems such as sliding. A sagging uPVC windows can cause problems with light, draughts and UPVC Window Repairs even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows so you can get at the frame. After that, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure they remain in position.

If you can't reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to keep your upvc window repair near me window watertight and draughtproof.

uPVC handles could also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close your window and do an initial test fit. The corners of the sash must align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk can be put on. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is related to the seal, not the frame. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze It could be the hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. Changing a window hinge is essentially a very simple process but it can be easier to do if you have someone to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrows on each hinge, this shows which way the window should open.

Faulty window hinges could be caused by improperly opening the window in a particular way or by improper installation in the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to offer advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also lower the risk of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges due to wear and tear may become displaced, which causes gaps to develop where the sash joins the frame. This can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it's possible to just give them a clean but in some cases it might be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it may be cheaper to replace them than to repair them. If you are experiencing issues with your Upvc window, it's best to consult a professional immediately.