Five People You Need To Know In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like aluminum and timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation you'll need locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will prevent water and drafts from entering your home until a professional is able to repair the window. It also acts as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can be affected by a variety of issues such as sliding. A window repair that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.

To fix a sagging Window repair you can try repositioning the hinges. First, you'll need to unblock the windows so you can get at the frame. Then, using an screwdriver, unscrew the top and bottom hinges and Window Repair adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and verify the fit. If you're satisfied with the size of the window, you can tighten screws to secure them in place.

If you can't reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and then perform a test fitting. The corners of the sash must be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's crucial to take action. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the issue the caulking used previously might need to be removed before a fresh layer can be applied. It is important to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes have no debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze it could be hinges that are at the fault. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Like any mechanical part hinges will be damaged over time. It is an easy procedure, but it is simpler with someone else to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be happy to give you advice.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges, also due to wear and tear may become displaced, which can cause gaps to develop where the sash meets the frame. If they are beyond repair, it could be required to realign them. Second, the interlock can be misaligned. It is located on the hinge's side and may need to be cleaned. In some instances it might be necessary to replace these.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repairs windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it may be more cost-effective to replace them than to repair them. So, if you're having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.