5 Common Phrases About Repairs To Upvc Windows You Should Avoid

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the distance between the door and the window is substantial, you may need to consider a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. It's important to take action immediately if you discover that your upvc window repairs near me windows are falling down.

Repositioning the hinges could help fix a window that is sliding. To do this, you'll need open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you are unable to reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle getting worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to shut the window and do a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if you get up each morning to find mouldy walls and floors that are wet. The leaks of water from windows do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking used previously may require removal before a new layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Mold spots and window repairs rotted sills are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It's easy to change a window hinge, but it's easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or due to a poor window repairs installation at the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you advice.

It is also crucial to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. Firstly the hinges, again because of wear and tear, may become displaced, which causes a gap to form where the sash meets the frame. If they are beyond repair, it could be required to realign them. The interlock may also become disaligned. It is located on the hinge's side, and might require to be cleaned. In some cases, it may be necessary to replace them.

The next common reason for draughts is window seals, these can become worn down or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce draughts.

One of the most effective ways to cut down on drafts is to use an draught excluder. These are typically fabric tubes filled with some sort of filler and can be positioned on top of your windowsill. They will keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. It is crucial to realize that all windows have a life span and eventually, they will reach a point where it is more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it is always best to seek professional assistance immediately.