Repairs To Upvc Windows: 11 Thing You're Forgetting To Do

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. However If you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you plan to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

Once the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and window repairs repair the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap is large, you might think about an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

upvc window repair windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a variety of issues that include sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to reach the frame. With a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen up. Often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to shut the window and do an experiment fitting. The corners of the sash should be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if awake each day to find mouldy walls and wet floors. The leaks of water from windows do can not only cause degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking used previously may need to be removed before a fresh layer can be applied. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it opens with an ease. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. It is an easy procedure, but it is easier to do if you have someone to help you hold the frame in place.

Check that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website will often resolve the problem. We are always happy to provide suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. First, the hinges due to wear and tear can become misaligned, this can cause an opening to appear where the sash joins the frame. If they're beyond repair, it could be necessary to get them re-aligned. In addition, the interlock could also become misaligned. It is located on the hinge's side, and could require to be cleaned. In certain instances, it may be necessary to replace these.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking cold air.

With a little maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. However, it is important to realize that windows last for a certain period of time and they may reach the point when it's more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it is best to seek professional assistance as soon as you can.