11 Ways To Completely Sabotage Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and uPVC window repairs thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor, where they could be trampled.

It's a great idea cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your property until a professional arrives to fix the window. This will also provide a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they may be afflicted by a variety of problems including sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to access the frame. After that, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, tighten the screws until they stay in place.

If you are unable to reposition the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism getting worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The corners of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on the severity of the issue is, old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with a breeze, it may be the hinges that are at the fault. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Like all mechanical parts hinges will wear out over time. Changing a window hinge is an easy process but it can be simpler when you have a person to help you hold the frame up.

Check that the uPVC hinges open and close in the right direction. You can check this by looking for the arrow on each hinge. This shows which way the window should be opened.

The issue could be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to offer suggestions.

It is also crucial to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges because of wear and tear, may become displaced, which can cause an opening to appear between the sash and the frame. If they're beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window and can be misaligned. Again, it's possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air escape. Installing high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and decrease draughts.

Another, and most effective ways to cut down on drafts is to use an draught excluder. These are typically made of fabric filled with some kind of filler. They can be positioned on top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it could be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your upvc repairs windows, it's recommended to seek help from a professional immediately.