5 Cliches About Repairs To Upvc Windows You Should Avoid

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need to find some plastic spacers to assist the new pane to fit correctly into the frame of the window.

If you are going attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your property until a professional comes out to fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the distance between the door and the window is large, you might need to consider security screens that includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts or even security. It's important to take action immediately if you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows so you can get at the frame. After that, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they remain in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen. Often this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need close the window and then perform an initial test to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home, and Double Glazing Rochester impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on how severe the issue is, the old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to remember that if the leak originates from the glass of your Double Glazing Rochester (Www.Repairmywindowsanddoors.Co.Uk) glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze, it may be the hinges that are at fault. They can be replaced by any competent DIYer and can usually be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is essentially a very simple process but it can be easier when you have a person to help hold the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or a faulty installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause an opening to appear between the sash and the frame. These can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock, which is on the hinge side of the window and can also be misaligned, and again it's possible to just give them a clean but in some cases it might be necessary to have these replaced.

The second most frequent reason for draughts are the window repair Marlow seals, these are prone to wear or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it is more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your window made of upvc, it's best to consult an expert immediately.