Repairs To Upvc Windows: What No One Is Discussing

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor and could be trampled.

It's a great idea seal the gap after the glass is removed. This will prevent water and drafts from entering your home until a professional is able to fix the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the distance between the door and the window is significant, you may prefer an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll have to open the window so that you can access the frame. Then, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you are happy with the size of the window, tighten the screws to secure them in the right position.

If you can't reposition the hinges, you might require replacing the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you wake up every morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking that was used up might need to be removed before a fresh layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and uPVC window repairs can reduce your energy efficiency.

Verify that the drainage holes are free of debris in them and that the sill pan has been properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window repair. The mold thrives in damp environments and can quickly spread across the home.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze It could be hinges that are at the fault. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical component hinges will wear out over time. It's very simple to replace a hinge on a window but it's much easier if someone else helps you hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you advice.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also reduce the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also be unbalanced due to wear, causing a gap between the frame and sash. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to get them realigned or replaced. Second, the interlock can be misaligned. This is located on the hinge side and may need to be cleaned. In some instances it is possible to replace these.

The second most frequent reason for draughts is window seals. These are prone to wear or damaged over time, and will allow air to escape through these gaps. Installing high-quality weatherstripping will help to stop draughts. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, uPVC window repairs and also lessen the possibility of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric which are filled with a sort of filler and can be put on top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.