5 Common Myths About Repairs To Upvc Windows You Should Stay Clear Of

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and will usually fit into the frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

It's a good idea to seal the gap after the glass has been removed. This will keep drafts and water from getting into your property until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the distance between the window and the door is substantial, you may want to use security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a variety of issues such as sagging. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to unblock the windows to access the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window repair to test the fit after you have repositioned your hinges. If you are happy with the fit of your window, you can tighten screws to keep them in the right position.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it could be caused by the handle mechanism getting worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to shut the window and do a test fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be applied. It is important to remember that when it is about Upvc Window Repair window repairs, upvc Window repair do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens in a breeze. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It is very easy to change the hinges on a window, but it's simpler if you have someone to help hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of improper installation in the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be more than happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based oils should not be used as they can damage your upvc window repairs near me windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also become disaligned as a result of wear, creating a gap where the sash meets frame. These can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also be misaligned, and again it may be possible to give them a clean but in some cases it might be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!

The windows made of upvc can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it may be more cost-effective to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.