See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs.

The device uses existing buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence that can be up to 20 presses long. This allows your vehicle to begin.

Simple PIN code Change Process

Many owners are upgrading their security due to the rise in vehicle theft. There are a variety of security products that are available, from tracking systems to immobilisers and alarms. However there are a few that are equally efficient in protecting your vehicle. A tracking device can aid in finding your vehicle if it's stolen, but it will not stop the crime. Immobilisers, on the other hand does exactly what it says on the tin: it shuts down your car's engine so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to steal your car.

The ghost device utilizes the buttons on your car to create an unique sequence that needs to be entered to allow the engine to begin. This can be done via the indicator stalk or window buttons. Additionally option, there is a mobile app which can act as an emergency PIN code override, allowing the driver to operate the car without using the button sequence. This is a great solution when you wish to donate your car to valet parking or for servicing. The immobiliser will stay in operation.

The Ghost is an innovative and unique device that operates with the buttons on your vehicle rather than as a standalone device. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can be used to secure any future vehicles you may own. This makes it a much better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is a high-tech security system that guards your vehicle from key cloning, hacking and ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be installed in the vehicle without the need for extra wiring and has been extensively tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices, which is a common technique used by thieves to bypass existing immobilisers.

The advantage of using CAN data is that it operates silently when compared to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by traditional diagnostic tools. The Autowatch Ghost doesn't use LED indicators, but instead uses buttons in your vehicle, such as the steering wheel, centre console, or door panels, to create an unique sequence of disarming. The sequence can be extended to 20 or more presses for extra security. The iPhone app allows a single, authorised connection using a pairing code that is unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also stops car thieves from using an additional key or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to run when the correct PIN code is entered. It can be temporarily operated in valet or service mode (with parameters set such as 30mph speed limit), so you can offer your vehicle to valet or service without entering the code.

Tested for each vehicle

The Autowatch ghost ii immobiliser is the world's first aftermarket immobiliser on the CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts signals to prevent your car from operating normally until you enter a customized code. The system can be turned on and off by using your smartphone's application without the need for additional wires.

Standard factory immobilisers in vehicles work by having a transponder inside the key that sends a signal to the ECU. If the correct code is transmitted the car will start however, if the transponder is replaced with one from a different vehicle, the immobiliser won't recognize it. This enables the vehicle to be started and Ghost Immobiliser Problems stolen. The Ghost immobiliser was developed by a South African company at the forefront of vehicle security systems technology. It protects you from hacking or key cloning, and even key theft. Only by physically towing your car away could a thief steal it, and they would still not be able drive it.

Ghost Immobiliser Problems uses buttons on your vehicle, like the indicator stalk, the steering wheel, and the doors, to generate unique PIN codes that needs to be entered in order to use your vehicle. This is performed without the need for extra hardware such as key fobs and can last up to 20 presses long. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals so thieves are not able to utilize sophisticated RF scanning or code-grabbing technology to detect that security systems have been installed.

In contrast to the physical devices that prevent theft, such as wheel locks or clamps, Ghost is covertly integrated into the vehicle to ensure that it can't be disabled or removed by thieves and is more difficult to remove from a car alarm which requires disarming via the use of a button sequence. This makes it an excellent addition to an GPS tracking device, which can be used to track your vehicle after it's been taken.

Override of emergency PIN code

You don't have to look far on social media for stories or videos of vehicles that have been stolen with the most advanced technology tools. This includes key-cloning and hacking tools that allow them to start your vehicle without your original key fobs.

The Ghost immobiliser has been specifically designed to prevent this and provide you with an additional layer of security in order to protect your vehicle from being targeted by thieves. It creates an unique pin code push sequence using your buttons on the steering wheel, door panel and the centre console. This unique PIN has to be entered along with your original key fob to stop the vehicle from getting started. The unique override pin is located on a black card that you will receive after your installation. It is easy to remember because there are no LED indicators.

The device is hidden inside the vehicle's wiring and doesn't emit any radio signals, so it can't be identified by modern thieves using diagnostic software that is able to detect the type of security system you have installed. This makes it a great alternative to the tracker.

Unlike most other security systems that use a relay inside the engine bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via CAN data bus (brand dependent). This allows them to disable the vehicle completely by sending the use of a digital block of commands for both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems, but this has to be stated prior to the installation of the device. They are also fully service/valet mode compatible and are a great alternative to a tracker you have your car checked for repair at the dealer.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen without the owners keys. With easy access to key cloning equipment and door lock pick sets, it is now much easier for thieves to steal your pride and joy. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if your keys have been copied.

It communicates directly to your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it doesn't utilize radio frequencies or keys fobs. This means it isn't detected by diagnostics or other car hacking devices. It also prevents the addition of the key to a new one or replacing the ECU to get around the system as only the correct PIN code will allow the engine to start.

The device is concealed inside your car by using buttons on the steering wheel, centre console and door panels. Before you can start your vehicle, you must enter a unique, changeable PIN code up to 20 numbers.

This is the very first aftermarket CAN-bus immobiliser that has been created. It will stop your vehicle from being started or driven if you don't enter a PIN code before entering. If the device is in armed and you attempt to drive away, it will display an indicator on your dash that will flash continuously for about 300m, if you enter your PIN code at this point it will deactivate the anti-hijack device and your car will continue to operate as normal. If you do not enter your PIN at this time the indication will continue to flash and will require a new PIN code every attempt to start your vehicle.