See What Ghost Immobiliser Problems Tricks The Celebs Are Utilizing

Protect Your Pride And Joy With The ghost immobiliser installation Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be changed up to 20 times. This allows your vehicle to begin.

Simple PIN Code Change Process

With the increasing rate of vehicle theft, a lot of owners are looking to upgrade their security. There are many kinds of security products that are available for ghost sale that range from tracking systems to alarms and immobilisers. Not all of them are equally effective at protecting your car. While a tracking system can assist you in locating your car in the case of theft, it can not prevent the crime from happening in the first place. Immobilisers, in contrast are exactly what they say on the label - they shut down the motor of your car to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your car.

By using the buttons that are already present in your car, the ghost immobiliser near me device creates a unique sequence which must be entered prior to the engine can start. This can be accomplished by using the heater, window or indicator stalk buttons. In addition to this option, there is an app for mobile devices that acts as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This feature is particularly useful if you need to hand your car over for valet parking or maintenance since the immobiliser is active and not deactivated.

The Ghost is a truly unique and ingenious device that works in conjunction with buttons in your vehicle instead of being a separate unit. It is not only an effective deterrent for vehicle theft however, it can be used to secure any future vehicles you may own. This makes it a better investment than a traditional wheel lock.

Weatherproof tiny device

The Autowatch ghost immobiliser is an advanced security device that protects your pride and joy against key cloning, hacking and ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU via the CAN data bus to disable the engine. It can be installed in the vehicle without the need for extra wiring, and has been thoroughly tested to ensure that it is compatible with all vehicles. It is also resistant to jamming devices, which is an approach used frequently by car thieves to circumvent the immobilisers in place.

The advantage of CAN data over conventional systems is that they operate in a silent manner. It cannot be detected using sophisticated RF scanning and code-grabbing technologies as well as recognized by conventional diagnostic tools. The Autowatch ghost doesn't produce LED indications and uses the buttons in your vehicle such as steering wheel or centre console panels to create a unique, programmable disarm sequence. The sequence can be extended by up to 20 presses for additional security. The iPhone app lets you make a single, authorised connection with a pairing code that is unique to the Ghost and communication between the two is encrypted.

The Ghost also prevents car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only start only if a valid PIN has been entered. It can be temporarily operated in valet or service mode (with parameters set such as a 30mph speed limit) which means you can hand your car to valet or service without having to enter the code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device detects signals to stop your car from starting up normally until you enter a custom code. The system can be turned off or on by using your smartphone app without the need for extra wires.

Standard factory immobilisers on vehicles function by using an electronic transponder in the key, which sends a signal to the ECU. If the correct code is transmitted the car will begin, but if a transponder is swapped with one from another vehicle the immobiliser won't recognize it. This enables the vehicle to be stolen and started. The Ghost immobiliser was developed by a South African company at the top of the line in vehicle security technology. It safeguards your pride and joy from hacking, key cloning and even key theft. The only way thieves could take your vehicle is physically towing it away and even then they wouldn't be allowed to drive it.

Ghost uses the buttons in your car, such as the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an individual PIN code that is changeable that needs to be entered before you can drive. This is done without the need for additional hardware like key fobs and can be as long as 20 presses long. It is also undetectable by devices for diagnosis and transmits radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code grabbing techniques to determine if an installation has been made.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is hidden within the vehicle, so it cannot be taken away or disabled by thieves. It's also harder to remove than a car alarm that requires disarming using an action sequence. This makes it an excellent supplement to a GPS tracker which helps locate your car after it has been stolen.

Emergency PIN code override

You don't have to go far on social media to see stories or even videos of vehicles that have been taken by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices as well as hacking tools that allow them to start the car without the original keys.

Our Ghost immobiliser combats this and provides you with an additional layer of security to stop your vehicle from being taken if it is targeted by thieves. It is created by creating a unique pin code sequence that is triggered by your buttons on the steering wheel, door panel and the centre console. The unique pin code is entered alongside your original key fob in order to stop the engine from getting started. The unique override pin is found on a black plastic card which you will receive following the installation. It is simple to remember because there aren't any LED indicators.

The device is hidden within the wiring of the vehicle and doesn't emit radio signals. This means it can't be detected using diagnostic software which can identify the security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

Unlike other security systems, that rely on a relay located in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This enables them to shut down the vehicle completely through a digital block of commands to both the ECU and the engine.

They can also be linked to a separate analogue alarm immobiliser or tracker. This must be specified prior to installation. They also work with valet/service modes and is a great alternative to a tracking device if you take your car into the dealer for repairs to an electrical problem.

Service/Valet mode

In recent years, there has been an increase in vehicles being stolen from owners without keys. It's easier than ever before to steal your pride and joy thanks to the availability of key cloning devices and door lock picks. To combat this we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been copied or your vehicle was stolen.

It communicates directly with your car's ECU (Engine Control Unit) via the data loop of CAN. It's completely silent as it doesn't utilize radio frequencies or a key fob. It isn't detected by diagnostics or any other hacking device. It also stops the user from using the new ECU or key to bypass the system, because only the PIN number allows the engine to be started.

The device is hidden inside your vehicle and is reached via the buttons on your steering wheel, centre console and door panels. Before you can begin your vehicle, you must enter a unique and changeable PIN code that can be as long as 20 numbers.

This is the first aftermarket CAN bus immobiliser that has been created. It will stop your vehicle from being started or driven if you don't enter a PIN number first. If the device is activated and you attempt to drive off it will display a warning on your dash, which will flash continuously for about 300m. If you type in your PIN code during this time, it will disable the anti-hijack system and your vehicle will continue to operate just as normal. If you do not enter your PIN at this point the indicator will continue to flash and require a new pin code every time you attempt to start your car.