It's The Next Big Thing In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you plan attempt to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass so that any shards will fall onto the cloth instead of onto the floor where they could be trampled on and cause further damage.

It's a great idea seal the gap after the glass is removed. This will keep drafts and water from entering your property until a professional is able to repair the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the distance between the door and the window is large, you might need to consider an alarm system that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of problems including sliding. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sagging. To do this, you'll need open the window so that you can access the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you can't reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as possible to ensure your upvc window repairs windows are watertight and safe from drafts.

uPVC handles can also loosen up. Most often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. You'll first need to close the window and then perform an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you wake up every morning to find mouldy walls and wet floors. The leaks of water from windows do can not only cause degradation of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, the old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window Repair repairs, do not be tempted to 'over-caulk and then make the area harder to clean and can reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with ease It could be the hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is essentially a simple process but it can be simpler with someone else to assist in holding the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are happy to offer assistance.

It is also important to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also be disaligned as a result of wear, creating a gap between the frame and sash. If they are beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window, may be misaligned. Again, it's possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and eventually, they will reach the point when it's more cost-effective to replace them rather than fix them. So, if you're having issues with your upvc windows, it's best to seek professional assistance as soon as you can.